r
rebecca frith Love it.
Skip to product information
Alkanatur Pitcher Replacement Filter 3 Pack
$119.85
Taxes included.
Shipping calculated at checkout.
Pickup available at 30 Fabio Court, Campbellfield VICTORIA 3061
Usually ready in 2 hours
Free standard shipping Australia-wide on orders A$100+.
A $10 standard shipping below A$100.
In-stock items dispatched within 1 business day after payment is received.
Description
Alkanatur Jug Replacement Filters – 3 Pack
Three genuine replacement cartridges for the standard Alkanatur Alkaline Ionised Antioxidant Jug and the pink Alkanatur jug. Manufactured in Spain using Alkanatur's patented filtration technology.
Keep spare filters ready: This pack includes 3 replacement cartridges for your Alkanatur jug. Need just one? Shop the single filter. Jug sold separately.
What's included
- 3 × genuine Alkanatur jug replacement filters
- Up to approximately 400 litres per filter
- Up to approximately 1,200 litres total rated capacity across the three filters
Alkanatur guidance commonly equates one cartridge to around 3–4 months of typical use, although actual filter life depends on consumption and incoming water quality.
Filter media
- Coconut-shell activated carbon
- Antioxidant alkaline bioceramics
- No ion-exchange resin
- Designed without adding sodium to the filtered water
Water characteristics
Alkanatur product information references a typical filtered-water pH range of approximately 8.5–9.5. Actual pH, ORP and mineral contribution vary with source-water chemistry, temperature, filter condition and measurement method.
Contaminant reduction & certification
Alkanatur publishes certification and laboratory information for specified contaminant-reduction performance and test conditions, including testing relating to chlorine, fluoride and selected metals and other substances. Published test results should be interpreted within their specified test conditions rather than as universal removal guarantees.
View Alkanatur quality certificates and testing information.
Preparing each new filter
- Remove the replacement filter from its packaging.
- Immerse it in water for approximately 15 minutes.
- Fit it securely into the Alkanatur jug reservoir.
- Follow the jug's current start-up and flushing instructions before drinking the filtered water.
Need only one cartridge? Choose the single Alkanatur Jug Replacement Filter.
Step-by-Step Instructions
- Soak and Activate the Filter:
- Fill the pitcher or a bowl halfway with tap water.
- Submerge the filter for about 20 minutes (you can place the water tank on top of it so it does not float) to let it release internal air bubbles
- Install the Filter in the Tank:
- Remove the filter and empty the pitcher.
- Place the filter tank on a stable, flat surface (do not push it in while it is inside the transparent jug, to avoid cracking it).
- Insert the filter with the grill facing up and the small hole facing down, pressing it firmly into place until it sits flush at the bottom of the tank.
- Flush the First Cycles:
- Place the assembled tank into the jug and fill it completely with tap water from the sink.
- Let the water filter through completely and discard the first 2 to 3 full batches of water (you can use this initial flush water for your plants).
- Note: The water may look slightly grayish or black during these first runs; this is completely normal and comes from the natural coconut active charcoal.
- Assemble the Jug:
- Put the reservoir and lid back onto the transparent pitcher.
- Your jug is now ready, and you can start drinking the water from the 4th cycle onward for the best taste.
https://www.youtube.com/watch?v=2kZyONqF1Jk